Castings (Ferrous & Non-ferrous)
Customise your product
- Process: sand / shell / gravity / HPDC; CT class per ISO 8062
- Grades: GG/GGG, carbon/alloy steels, LM/ADC Al, bronzes
- Machining stock, riser/feeder plan, NDT gate (UT/RT/MPI/DPI)
- Heat treatment: normalize / Q&T / stress-relief
Branding & Packaging
- Stencil: part no., heat/lot, grade & weight; paint colour codes
- VCI wrap or rust-preventive oil, shrink & desiccants; ISPM-15 skids
- Crate/part map with pick points; handling/lift lugs marked
Sustainability & Compliance
- EN 10204 3.1/3.2 MTCs; chemical + mechanical reports
- Sand reclamation/ETP declarations; fume capture SOPs
Forgings & Rolled Rings
Customise your product
- Open/closed die, near-net; ring OD/ID/height; upset ratios
- Grades 4140/4340/8620/SS; grain-flow orientation
- Heat treat: normalize/Q&T/induction; surface after shot-blast
Branding & Packaging
- Die no. & heat no. stamped; colour-band per size/grade
- VCI paper, edge guards; palletised ring stacks with spacers
Sustainability & Compliance
- 3.1/3.2 certs, hardness & microstructure; NDT plan
- RoHS for coatings; oil & scale disposal declarations
Precision Machining & Assemblies
Customise your product
- GD&T callouts, Ra targets; 3–5 axis, HMC/VMC, grinding & honing
- Kitted sub-assemblies with fasteners/seals; torque specs & Loctite plan
- Special gauges/fixtures, PPAP/FAIR level
Branding & Packaging
- QR/UID labels (part/rev/lot); plug & cap protection; ESD where needed
- Foam trays or partition packs; crate map & FAI packet inside
Sustainability & Compliance
- CMM reports, Cp/Cpk on CTQs, MSA/GR&R; calibration logs
- Coolant & swarf recycling statements
Gears & Power Transmission
Customise your product
- Module/DP, face width, helix; AGMA/ISO quality target
- Heat treat: case-carb, nitriding, induction; profile grinding
- Balance grade & noise level (where needed)
Branding & Packaging
- Match-marking for pairs; anti-rust oil, paper wrap; hub caps
- Tooth profile/lead charts in each carton; barcode labels
Sustainability & Compliance
- AGMA/ISO grade certificate, hardness & case depth
- RoHS plating; salt-spray/adhesion tests for coated parts
Sheet-Metal & Fabrication
Customise your product
- Thickness & alloy; laser/punch/press-brake; weld: MIG/TIG/SAW/spot
- WPS/PQR and weld symbols; powder/e-coat/HDG finish
Branding & Packaging
- RAL colour box; mask & tape map for paint; hardware kits
- Skids with edge protectors; tilt/shock indicators for assemblies
Sustainability & Compliance
- Welder quals ASME IX / ISO 9606, weld maps & NDT reports
- Coating adhesion & salt-spray; VOC capture/booth logs
Hydraulics & Pneumatics (Blocks, Cylinders, Manifolds)
Customise your product
- Material (6061/7075/SS), port threads, Ra for bores; pressure rating
- Seal kits (NBR/FKM/PTFE); cleanliness ISO 4406 target
Branding & Packaging
- Plastic caps/plugs, oil-flushed & sealed; pressure-test sheet in carton
- Clean-room bagging where needed; QR lot traceability
Sustainability & Compliance
- 100% hydro/air test with acceptance criteria; helium leak if required
- REACH/RoHS elastomer & fluid declarations
Fasteners & Turned Parts
Customise your product
- Standards: DIN/ISO/ASTM/BS; thread class & coating (Zn/Zn-Ni/black)
- Head types, property class (8.8/10.9/12.9), special lengths
Branding & Packaging
- Head stamping; small boxes → master cartons with count verification
- Barcode & heat/lot on labels; sachets for kits
Sustainability & Compliance
- PPAP L3 on auto lines; tensile, hardness, proof load
- RoHS/REACH plating; salt-spray hours to spec
Automotive / EV Sub-systems
Customise your product
- Housings, brackets, knuckles, battery trays/busbars, charger enclosures
- Mechanical properties, weld studs/inserts, sealing & NVH targets
Branding & Packaging
- IMDS IDs, part family labels, FIFO lotting; returnable racks or dunnage
- Trace plan: UID/laser for safety-critical parts
Sustainability & Compliance
- IATF 16949 docs: APQP, PFMEA, CP, PPAP; 8D for deviations
- End-of-life & recyclability statements; e-coat/powder VOC control
Jigs, Fixtures & Tooling
Customise your product
- Datum scheme & clamp strategy; gauge pins & feelers; modular or welded
- Target repeatability & GR&R limits; build manual
Branding & Packaging
- Nameplate with P/N, rev, weight; anti-rust coat & covers
- Crate with assembly drawing, spares & calibration sheet
Sustainability & Compliance
- Steel certs 3.1; hardness & flatness records; buy-off CMM report
- Safety interlock & ergonomic notes (where applicable)
Machine Tools & Spares
Customise your product
- Spindle speeds, travels, ATC, ballscrew & guide brands; coolant/chip systems
- Retrofit/automation (probe, pallet, robot) options
Branding & Packaging
- CE plate & manuals; run-off report; vibration-safe skids & restraints
- Spare kit & lubrication chart; QR service tags
Sustainability & Compliance
Energy-efficient drives; coolant recycling & mist extraction notes
Geometry tests (laser/bal lbar), noise & power; CE where needed
